EFT/ Burst Generator PEFT Junior
19
4.2.1.9 Function keys F1 to F4 (9)
The keys F1 to F4 activate user access to the functions shown on the respective lines of the
display. After pressing a key, the cursor is visible, and the parameter can be changed. After
entering the new value, press the function key again and the parameter is entered. Parameter
values consist of both alphabetic and numerical characters.
4.2.1.10 Menu next page (10)
The key
↓
enables scrolling forwards, only if the
→
→
→
→
character is available at the end of the fourth
line.
4.2.1.11 Numerical keypad (11)
The numerical keypad is used to enter numerical values or change predefined values.
The keys 0 to 9 are used to change a parameters numerical value. When a parameter has been
selected with one of the function keys, the cursor is placed on the last digit of the parameter
value. New data entered from the keypad automatically overwrites the previous value. When a
change is confirmed with the ENT key, the internal memory replaces the old data with the new
value.
The cursor is no longer visible.
.
is the numerical comma.
Press ENT to place the current parameter value in memory.
The BSP key shifts the cursor by one digit to the left. the key is useful for corrections.
The UP key increments a numerical value or changes the value of a pre defined alphanumeric
character.
The DWN key decrements a numerical value or changes the value of a pre defined alphanumeric
character.
