Artesyn AXP640, Инструкция по установке и эксплуатации

Страница: 165 / 190

Chapter 7
AXP640 Installation and Use (6806800M24F)
165
Shelf Management Alarm Module
7.1 Overview
This chapter describes the AdvancedTCA Shelf Management Alarm Module, hereafter known
as the SAM, which consists of the Shelf Management Controller (ShMC) and the Shelf
Management Mezzanine Module (ShMM) which installs on the carrier blade. Two SAMs are
installed into two dedicated shelf manager slots located at the front right of the AXP640, 6 slot
shelf. The SAM is hot swappable and the connectors are accessible through the face plate.
You will find the following information in this chapter:

Features

SAM Diagram and Face Plate Layout

Functional Description

Hardware Monitoring and Control

Telco Alarm Functionality

Hot Swap Interface

Power

SAM Software
The SAM supports redundant operation by automatic switchover between two SAMs. When
two SAMs are present in a shelf, one acts as the Active SAM and the other acts as a Standby
SAM. They share signals across the AdvancedTCA backplane that allow them to coordinate
their redundant operations. The SAM provides access to the IPMCs for the Power Entry Module
(PEM) and the two fan trays through the IPMB. The SAM also provides access to the AC PSUs
from the upper slot via a private I2C interface.The SAMs use IPM Sentry Shelf Manager software
for system management. Refer to
SAM Software on page 184 for further information.
The SAM also provides these operations for the AXP640 shelf:

Control for the activation/deactivation of AdvancedTCA blades

Handles E-Keying

Control of Power Management

Monitoring of overall system and blade level health

Logging for critical system events