Artel DigiLink DLC170, Установка и эксплуатация

Страница: 46 / 50

36 DLC170 Function Modules Installation and Operations Manual
DLC170 Function Modules
Figure 21. Removing the Audio Cable Connector
Removing the DLC170 Module
To remove the DLC170 from the host chassis, perform the following steps:
1. Remove the fiber optic cables from the DLC170 module SFP.
2. Remove the coaxial cables from the BNC connector.
3. Remove the audio cable connector (see the “Removing the Audio Cable Connector” section on page 35 ).
4. Loosen the two mounting screws that secure the DLC170 to the host chassis.
5. Using the two mounting screws, pull the DLC170 out of the host chassis.
Caution
To avoid problems associated with overheating, do not leave a function module slot open when
power is applied to the chassis. Every module slot must contain a module or blank tray to ensure
proper ventilation when power is applied.
Connector Mounting
Screws (2)
Audio Cable Connector