Artel DigiLink DLC170, Установка и эксплуатация

Страница: 38 / 50

28 DLC170 Function Modules Installation and Operations Manual
DLC170 Function Modules
Configuring Audio Characteristics with DIP Switch SW2
Switch SW2 enables audio output and controls various audio characteristics of the DLC170DA, such as audio
output format and the audio source group selection. This switch also enables the optical repeater and EMS
override functions.
Figure 17 shows the DLC170DA configuration switch SW2 located on top of the PCB.
Figure 17. DLC170DA Configuration Switch SW2
Table 9 describes the DIP switch SW2 configuration options. The factory-set configuration settings are shown
in bold type.
Table 9. DIP Switch SW2 Settings
Function Selected Operation
Position
S1 S2 S3 S4 S5 S6 S7 S8
Audio output Enabled
ON
Disabled OFF
Audio output
format Analog
ON
AES-3 OFF
Audio Source Group 1
ON ON
Group 2 OFF ON
Group 3 ON OFF
Group 4 OFF OFF
Reserved Must be ON
ON
Reserved Must be ON ON
Optical repeater
disable Disabled
ON
Enabled OFF