background image

DLC170 Function Modules Installation and Operations Manual 

v

 

 

COPYRIGHT

This manual is produced and copyrighted by Artel Video Systems Corporation. Any use or reproduction of the 

contents of this manual without the prior written consent of Artel Video Systems Corporation is strictly 

prohibited.

NOTICE

All title and copyrights to this document are owned by Artel Video Systems Corporation. No part of the 

contents of this document may be reproduced or transmitted in any form or by any means without the written 

permission of Artel Video Systems Corporation.
Artel Video Systems Corporation shall not be liable for errors contained herein. Artel Video Systems 

Corporation shall not be liable for any damages whatsoever, including, without limitation, damages for loss of 

business profits, business interruption, loss of business information, or other pecuniary loss arising out of the 

use of this documentation even if Artel Video Systems Corporation has been made aware of the possibility of 

such damages.
Information contained in this document is subject to change without notice. While every effort is made to 

ensure that the information is accurate as of the publication date, users are reminded to update their use of 

this document with documents published by Artel Video Systems Corporation subsequent to this date. 

Updates may be available at www.artel.com or by contacting Artel Video Systems Corporation.
Third-party product information is for informational purposes only, and constitutes neither an endorsement 

nor a recommendation. Artel Video Systems Corporation assumes no responsibility with regard to the 

performance of the third-party products.
Copyright © 2016 by Artel Video Systems Corporation 

ALL RIGHTS RESERVED 

Printed in U.S.A.
Artel Video Systems Corporation 

5B Lyberty Way 

Westford, MA 01886 

(978) 263-5775
www.artel.com

Содержание DigiLink DLC170



















































Отзывы: