Artel DigiLink DLC170, Установка и эксплуатация

Страница: 45 / 50

DLC170 Function Modules Installation and Operations Manual 35
Removing the SFP, Audio Cable, and DLC170 Module
Removing the SFP, Audio Cable, and DLC170
Module
You can safely remove either the SFP or audio cable connector from the DLC170, or the DLC170 from the host
chassis while power is applied to the module.
This section contains the following topics:
• Removing the SFP (page 35)
• Removing the Audio Cable Connector (page 35)
• Removing the DLC170 Module (page 36)
Removing the SFP
To remove the SFP from the DLC170 (see Figure 20 ), perform the following steps:
1. Remove the fiber optic cables from the SFP.
2. Pull down on the SFP handle to dislodge the SFP from the DLC170.
3. Using the SFP handle, pull the SFP out of the DLC170.
Figure 20. Removing the SFP
Removing the Audio Cable Connector
The audio cable connector enables you to easily remove the audio cables from the module without having to
remove each cable. This enables you to swap out the DLC170 without having to rewire the audio cable
connections.
To remove the audio cable connector from the DLC170 (see
Figure 21 ), perform the following steps:
1. Loosen the two screws that secure the cable connector to the DLC170.
2. Remove cable connector from the DLC170.
SFP handle