ARRI ARRIFLEX 435 ES, Инструкция по эксплуатации

Страница: 86 / 143

Accessories
86
The SHUTTER Menu
This menu has no function on the ARRIFLEX 435.
With the SHUTTER menu, shutter angles within acceptable
range of 11.2
°
to 180
°
can be set as desired with an accu-
racy of 0.1
°
. The shutter angle can be changed in standby
or while the camera is running. In the upper line the shutter
angle currently set on the camera control unit is displayed,
below that the shutter angle of the camera.
• Using keys “1” to “7”, select one of the standard shutter
angles listed in the SHUTTER menu. The selected shutter
angle is displayed in the uppermost line.
• Transfer the selected value to the camera with the
“SEND” key.
Alternatively, other shutter angles within the acceptable
range can be entered directly:
• Depress key “9” (VAR) in the SHUTTER menu.
• Enter the desired shutter angle.
• If the digit after the decimal point is to have the value 0,
this needs not be entered. Complete the input with the
“ENTER”-key. The selected shutter angle is displayed in
the uppermost line on the CCU.
• Transfer the chosen value to the camera with the
“SEND”-key.
The REMOTE Menu
In the REMOTE menu the camera control unit displays the
same information as the camera display. The last digit after
the decimal point will be suppressed (4 digits instead of 5
as in the camera display).
The keys “F1” to “F4” assume the functions of the operating
elements on the camera. The lower line of the CCU display
shows the key functions:
F1 “PHASE” -button
F2 “MODE” -button
F3 “SET” -button (RESET on the CCU)
F4 “PROG” -button (program)
Operating the camera in the REMOTE menu is analogous
to operation with the respective buttons on the camera.