ARRI ARRIFLEX 435 ES, Инструкция по эксплуатации

Страница: 80 / 143

Accessories
80
fastening screw
fastening flaps
Functional Expansion Module FEM
The functional expansion module expands the application
possibilities of the ARRIFLEX 435. It is included in the standard
package of the ARRIFLEX 435ES.
The TC-generator, the TC-buffer and the TC in- and
outputs are integrated into the FEM. In addition, the FEM
offers interfaces for camera accessories:
”ACC” socket: ESU-1, RU-1
”CCU” socket: CCU-1, RCU-1, LCC and RS 232 interface.
Note: Use of the RU-1 is possible, but not recommended.
The range of frame rates that can be adjusted with
the RU-1 is limited to 8.1 - 130 fps. Furthermore,
the set frame rate does not correspond to the scale
on the adjusting wheel. The exposure time in
“Auto”-mode is also not 1/100 s, but 1/260 s.
The FEM is mounted directly onto the camera in place of
the electronic cover.
• Switch off the camera’s main switch and disconnect the
camera from the power supply.
• Unscrew the fastening screw on the electronic cover.
• Swing the electronic cover away to the side and pull off
backwards.
• Place the fastening flaps of the FEM
➪
photo into the
recesses in the camera housing.