ARRI ARRIFLEX 435 ES, Инструкция по эксплуатации

Страница: 63 / 143

63
Camera Operation
Mode 1 Mode 3
Take length or Total exposed film or
Total exposed film Take length
Film Counter
Displaying the Film Counting Values
(Modes 1 and 3)
Film counting values are shown in Modes 1 and 3.
Two different counting values are shown respectively:
• the total amount of exposed film or
• the take length (amount of film used in an individual take)
A “t” in the first digit of the upper display line indicates
the display of take length.
Setting the Film Counter Configuration
(Mode 3)
The display configuration can be set individually.
The two shown combinations are possible:
The desired display configuration can be set in Mode 3:
• Change from Mode 1 to Mode 3 by depressing the
“MODE”-button twice.
• Depress the “SEL”-button twice; the first digit in the
upper display line blinks.
• Within three seconds, depress the “SET”-button.
• The currently set counting value of Mode 3 is displayed.
The corresponding counting value in Mode 1 is auto-
matically altered.
Resetting the Film Counter
(Modes 1 and 3)
• Change to the mode which shows the total amount of
exposed film (“MODE”-button).
• The total exposed film counter can be set to zero by
depressing the “SET”-button (for at least 3 seconds)
while in standby.
• The take length counter is automatically reset each time
the camera is started.
Changing the Unit of Measurement (Meters/Feet)
(Mode 3)
Standby Operation
• Change from Mode 1 to Mode 3 by depressing the
“MODE”-button twice.
• Depress the “SEL”-button once; the symbol m/ft blinks.
• Depress the “SET”-button within three seconds to change
the unit of measurement.