ARRI ARRIFLEX 435 ES, Инструкция по эксплуатации

Страница: 17 / 143

17
Installation
mounting screws
mounting screw
shoulder set S-4
Operation from the Shoulder
Shoulder Set S-4
The shoulder set S-4 was designed to optimize shoulder
operation of the ARRIFLEX 435/435ES. It allows the camera
to be quickly transferred from the tripod onto the operator’s
shoulder without having to remove the optical accessories.
Shoulder Set S-4 with the Bridge Plate
• Remove the camera from the tripod
(see under Bridge Plates BP-8, BP-9).
• The mounting screws on the shoulder set must first be
screwed back as far as they will go
➪
photo .
• Now slide the shoulder set from the rear into the dovetail-
guide on the bridge plate as far as it will go. It locks auto-
matically in position.
• Clamp the shoulder set using the bridge plate clamping
lever.
• Plug the cable for starting and stopping the camera into
the RS-socket.
• Check that the shoulder set is firmly seated on the camera.
• Position the shoulder cushion on the camera with the
index pin and fasten it to the camera with the mounting
screw
➪
photo .
• Check that the shoulder cushion is firmly seated on the
camera.