Array electronic AF-10MR-A2, Руководство пользователя

Страница: 88 / 129

FAB2 Intelligent Controller
2. Middle Relay: for setting of the Intermediate Relay connected with the current
block. When set it, the other blocks can’t use it any more, which means that its
usage is unique. Its parameter value is from M0-M126, totally amounting to 127.
3. Special Input: X represents empty, HI represents high potential and LO
represents low potential. When the input is X, this terminal allows connection
with a lead from another block. When the input is HI, no lead from any other
block can be connected to this terminal and its status is always at high level.
When the input is LO, this terminal allows connection with no lead from any
other block and its status is always at low level.
3.3.3.2 Setup of Special Properties
Some special blocks have special properties including RS relay block, D/W
clock switch, counter. These blocks are described respectively as follows.
1. Blocks with timer
The blocks such as MPLR
、
DPR
、
DDR
、
CPG
、
RPR and so on, have timing
function. Their block properties setup dialogue box is as shown in fig. 3.15.
Fig 3.15
Time type: Three units, namely second, minute and hour, are available for
selection;
Input time: set the time value timing, its accuracy is up to 0.01s, other setup is
referred to setup of the general block;
87