Array electronic AF-10MR-A2, Руководство пользователя

Страница: 62 / 129

Chapter VI Application
USER'S MANUAL
5. In case of any fault in the ventilation system, the alarm lamp shall be on.
The ventilation system is controlled by the flow sensor; if no atmosphere flows
in the room, then wait a short time, cut off this system and send failure.
The Function Block Program Diagram is as follows:
Description:
I1: connected to the start button
I2: connected to the stop button
I3: connected to the waste gas flow monitor
I4: connected to the fresh air flow monitor
Q1: connected to the waste gas exhaust equipment
Q2: connected to the fresh air forced-draft equipment
Q3: connected to the alarm lamp
6.5 The neon lamp control system
1. Display mode, for example: Array Electronics Welcomes You !
1 . 1 Displaying “Array”
1 . 2 Displaying “Array Electronics”
1 . 3 Displaying “Welcomes You!”
1 . 4 Cycling 1.1-1.3
2. Control requirements
(1) It shall be automatically turned on at 18:00:00 and off at 23:59:59 every day.
(2) The control transition is performed by the manual/self-acting selection switch.
61