Array electronic AF-10MR-A2, Руководство пользователя

Страница: 45 / 129

FAB2 Intelligent Controller
4.2 Password confirming
When the user observes the AF-HMI in the above status display interface, press
the “ESC” and “OK” keys at the same time to enter the password confirmation
screen, as shown in Fig 4.3, FAB2 needs to enter the password value at this time,
and the cursor stays at the high position of the password.You can use the +/- keys
to change the numeric value (0-9).
When you press the +/- key for the first time, the password value is 0. You
can use the left/right keys to move the password input position and enter the
remaining number of password values.If the user password is entered correctly,
it will enter the panel function interface;If the user password is not entered
correctly, it will stay on the input password interface.
Four-digit password, every time you enter a digit to enter the next digit, the
previous digit is hidden with the * symbol, and you must enter the four-digit
number to enter the FAB2 function interface.
Fig 4.3 Password Interface
4.3 Function Interface
When the user enters the following function interface, please kindly use ▲ and
keys to move the left “>” key and press OK key to select the function,
including four options.
Editor.. Program Edit (System Reserved, FAB2 Not Enabled)
FAB2/Rom Read FAB2 program, simulate calibration, modify FAB2 address,
etc.
Set.. Real time clock setting and password setting
Run Run FAB2 program, click RUN to return to FAB2 status display
interface
Verify
Users
Password
xxxx
▲
44