Array electronic AF-10MR-A2, Руководство пользователя

Страница: 104 / 129

FAB2 Intelligent Controller
4.2.6 Simulation operation
Quick II has a Simulation Run Function in addition to editing function, after
programming is completed, you can start Simulation Function, for checking if it
meets your control requirement.
Operating methods:
1. Click FAB2 Operation→Simulation→Start, as shown in Fig. 4.16, or directly
click icon in the Tool Bar. Now you can see the result of program running
through I/O status in the frame as shown in Fig. 4.17.
Fig 4.16
2. Please observe that your programs are running carefully.
3. Click
again to end Simulation Function.
Fig 4.17
In the above simulation graph, you can see I/O status, as well as the current
status of timing and counting blocks. So you can easily judge through this
Simulation Function if the edited program meets your control requirement.
103