manualshive.com logo in svg

Arjohuntleigh Maxi Move KMC*U Series, Техническое руководство

Поделиться
Скачать
Arjohuntleigh Maxi Move KMC*U Series Скачать руководство пользователя страница 8

8

Service Procedures

SP2-Gravity Code Change

•  Confirm the selected code with the following button:

•  For codes 00-98, the configuration is complete. WAIT 5 SECONDS, and then shut off the
instrument.

•  Code 99 permits the gravity configuration for a location specified by a known elevation and
latitude. When the code list indicates that a code 99 should be used, or a location is
undetermined in the gravity adjustment table, use the Google Earth application to determine the
latitude and altitude. 

•  Get on the internet at the following address: 

http://www.google.com/intl/en/earth/download/ge/

•  Locate and click the “Download Google Earth 6” button (or newer version if available).

•  After the download is completed, install the application on your computer following
instructions on the screen.

•  Run the application and get into the “Tool” menu then, select “Option” from the drop-down
list.

CONFIRM

button

Содержание Maxi Move KMC*U Series





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды