5
General Information
Non-Verified scale
Each Maxi Move KMC*U* is equipped with a
non-verified scale
. Although the load cell is
identical to a verified scale, the verification
process is less complex. These scales don’t need
to be certified by an authorized notified body
and don’t use the software seal system as do
verified scales. Also, the verification and
calibration can be carried out by an ARJO
technician. The scale marking labels for these
units are located on the mast, behind the battery
pack (see Fig.2).
Fig.2
The tilt sensor is disabled for non-verified scales
and the units of measurement can be set either to
“kg” or “lb”.
Note: For scale operation instructions,
see the scale section in the Operating and
Product Care Instruction manual for the
Maxi Move floor lift.
