6
Service Procedures
SP1-Counter Verification
(Verified Scale Only)
Using the handset, enter the “Gravity Code” menu and look for the
calibration counter value
and the
gravity counter
value.
STEP 1
To display the
Hoist Status
Screen, press
both operating
buttons at the
same time.
Fig.3
STEP 2
Once in the Hoist
Status screen,
press on the
enter button.
Fig.4
STEP 3
Press the down
button three
times to find the
Gravity Codes
settings.
Fig.5
STEP 4
To return to
normal scale
function, press
the exit button.
Fig.6
Compare both values to the ones on the scale
marking label. If there is a difference, this means
an unauthorized change has been performed on
the calibration and/or the gravitational code. The
scale is not longer valid and must be verified by
a notified body.
A new label must also be applied to match the
values stored in the counter within the load cell.
Label sheets for the scale may be ordered as
spare parts (#001-25061).
Operating
buttons
Gravity code
Elevation and
latitude (only
for code 99)
Calibration counter
value
Gravity counter
value
Exit button
Down button
Enter button
