28
Service Procedures
SP5-Scale Calibration
Failed connection:
Once successfully connected, the “Calibrate”, “Get information” and “Constantly get
information buttons” will become available:
Get Information: Gets the current weight and angle of the scale.
Constantly get information: Same as “Get Information”, but information is updated each
second for the weight, and each 5 seconds for the angle. You must click the button again to
stop getting information and to be able to perform other actions.
Calibrate: This will calibrate the scale. The steps involved in calibrating the scale are as
follows:
8) Click the “Calibrate” button.
9) Click “Yes” to confirm the calibration process.
