Arjo Sara 3000, Инструкция по эксплуатации, Страница: 9 / 96

9
Allowed Combinations
WARNING
To avoid injury, always follow the allowed combinations listed in this IFU . No other
combinations are allowed.
Safe Working Load (SWL)
WARNING
Always follow the lowest SWL in the complete system (lift or sling).
• Only use the earlier listed slings with the 6DUD/LWH6WHG\ / Flex standing and raising aid.
• The SWL of the 6DUD6DUD)OH[ LVNJOEVWKH6:/RIWKH 6DUD/LWH is 175 kg
OEVDQGWKH6:/RIWKH 6DUD6WHG\ LVNJOEV
• Always follow the lowest SWL in the complete system. E.g. the 6DUD lift has a SWL of 200
NJOEVDQGWKH0$$KDVD6:/RINJOEV7KLVPHDQVWKDWWKH0$$
Flites has the lowest SWL. The patient is not allowed to weigh more than the lowest SWL.
Standing/
Raising Aid Sara 3000,
Sara Flex
Sara Lite Sara Stedy
SWL NJOEV NJOEV NJOEV
Active Sling SWL Size Size Size
MFA3000 NJOEV One size One size One size
TSS.500-503W NJOEV S, M, L, XL – S, M, L, XL
TSS.500-503S-1C NJOEV S, M, L, XL S, M, L, XL S, M, L, XL
TSS.500-504 NJOEV S, M, L, XL, XXL S, M, L, XL, XXL S, M, L, XL, XXL
TSS.501-502SV NJOEV M,L M,L M,L
TSS.501-503A NJOEV M, L, XL M, L, XL M, L, XL
TSS.511 NJOEV One size – –
MAA3060M NJOEV One size – –
MAA3061M NJOEV One size – –
MAA3070M NJOEV One size One size One size
MAA3071M NJOEV One size One size One size
Clip Attachment & Detachment
Attach the Clips (6 steps)
1. Select the inner or outer attachment clips.
2. Place the clip on the spreader bar lug.
(See Fig. 5 )
3. Pull the strap down.
4. Make sure the lug is locked at the top end
of the clip. (See Fig. 6 )
5. Make sure the strap is not squeezed
in between the clip and the spreader bar.
6. Make sure the straps are not twisted.
Detach the Clips (3 steps)
Make sure that the weight of the patient is taken
up by the receiving surface before removing
the clip.
1. Pull the strap up.
(See Fig. 7 )
2. Make sure the lug is unlocked
at the bottom of the clip.
3. Remove the clip.
Fig. 5 Fig. 6 Fig. 7
EN