ARIS Linearis N+, Оригинальное учредительное заявление с ручным управлением

Страница: 4 / 32

4 Linearis N+
1.2 Guidelines and standards
ARIS actuators are partly completed machinery according to directive 2006/42/EC. This is certified by a declaration of incorporati-
on (see page 30).
Further applicable EC directives: EMC Directive 2004/108/EC
Applied harmonized standards: LVD (electrical safety) DIN EN 61010-1:2011-07
MachDir DIN EN 12100:2011-03
EMC Directive 2004/108/EC DIN EN 61000-3-2
DIN EN 61000-3-3
DIN EN 61000-6-2
DIN EN 61000-6-3
DIN EN 55011:2001-04
DIN EN 61000-6-4:2011-09
Protection classes by housing (IP-Codes): Protection class test DIN EN 60529:1991
EMC consideration of the complete plant and system pertubations and their combating
have to be carried out by the plant builder or operator. The wiring of the actuator should
comply with DIN EN 60204-1.
2. Safety information
2.1 Warnings
Symbols: Installation and initial operation only by certified experts according to the manual.
Observe the significance of the following symbol and note explanations. They are subdevided in security levels and classified
according to ISO 3864-2.
DANGER indicates a hazard with a high risk degree, which, if not avoided, causes death or
heavy injuries.
WARNING indicates a hazard with a medium risk degree, which, if not avoided, can cause
death or heavy injuries.
CAUTION indicates a hazard with a low risk degree, which, if not avoided, can cause slight
or moderate injuries.
Indicates general advices, useful hints and work recommendations, which don´t have
influence on the safety and health of the staff.
2.2 General safety advices
The actuator components are conform to the state of the art and apply as generally safe at the time they are shipped.
This manual serves as basis to install and operate ARIS actuators safety conform. All persons working with or on ARIS actuators
must observe this manual and especially its safety advices.
DANGER
ADVICE
!
CAUTION
WARNING
HINWEIS
!