ARIS Linearis N+, Оригинальное учредительное заявление с ручным управлением

Страница: 12 / 32

12 Linearis N+
Overview TÜV-Poti
Electrical connection
Connect terminals 18, 19 and 20 according to the desired needs (voltage ≤ 50V); (see page 11). Use only separate, shielded wires.
Adjustment
Set the limit switch prior to adjustment of the potentiometers SP28. Electrically drive towards both end positions (see chapter 5.2).
Match both travel and potentiometer resolution.
Within the long holes, the poti can be rotated up to 20° per hole (Fig. 1). If a rotation of more than 20° is necessary, the poti
fastening screws are moved to the next hole. Then poti kann be moved in 20° steps up to 360° (Fig. 2). Fasten the screws with a
torque of 1.8 Nm.
It is mandatory that the factory-set TufLok screws must be used after loosening.
Recommendation: Secure the poti fastening screws with thread-lock fluid.
ADVICE
!
Poti Novotechnik SP28
Micro switches
Switch cams
Fig. 1
Poti adjustment up to 20°: Adjustment within
the long holes. No move of screws necessary.
Fig. 2
Poti adjustment 20° to 360°: Screws must be moved.