Argo Service Manual Engine System
Ontario Drive & Gear Limited. www.odg.com
PH. (519)- 662-2840 FAX (519)- 662-2421
5
6
IMPORTANT
If you have removed the Kohler Aegis radiator assembly from the engine for any
reason (repair, replacement etc.), ensure, when reinstalling it, that you tie-wrap the
bottom of it securely to the lower bracket as in photo 7 & 8. This will prevent the
lower radiator locating pins from dislodging from the rubber gromments under
heavy vehicle application. Damage can occur to both fan and shroud if this is not
done. Please note that later spec. engines have retaining clips installed to the
locating pins and do not require the tie-wraps to secure the rad in place.
7
8
7.
Attach the hoist hooks to the engine lo-
cation as described in 14 of Remov-
ing The Engine.
8.
Swing the engine assembly over the
open hood area of the Avenger vehi-
cle. Locate the (4) mounting studs on
the power pack frame. Photo 9
9
EN-26A
