Argo Service Manual Engine System
Ontario Drive & Gear Limited. www.odg.com
PH. (519)- 662-2840 FAX (519)- 662-2421
16. Remove the engine to a clean workbench for further disassembly.
17. Remove the muffler if it was not previously removed. (EFI models will have an O2
sensor threaded into the muffler that will need to be removed as well. Photo 22
18. Remove the hex head fastener securing the driver clutch to the PTO and slide the
clutch from the shaft. The PTO is a keyed shaft. Photo 23 & 24
19. Remove the (5) shims that are installed to the PTO. Photo 25
IMPORTANT
These shims MUST be reinstalled before the driver clutch.
22
23
24
25
20. Remove all fluids.
EN-24A
