Argo Service Manual Engine System
Ontario Drive & Gear Limited. www.odg.com
PH. (519)- 662-2840 FAX (519)- 662-2421
10. Disconnect the brake cooling hose at the brake duct. Photo 13
16
Removing The (4) Engine Mount
Fasteners
17
12. To effectively and efficiently remove
the nylon locknuts that are securing the
engine to the power pack frame studs, a
flat ratcheting style wrench is the rec-
ommended tool of choice. Photo 16
This type of wrench is preferred for removing 3 of the 4 nylon locknut fasteners. The
exception is the fastener located at the rear left corner of the engine block (as viewed by
the operator in the drivers seat). This fastener requires the use of a regular opened end
style wrench.
13. Remove each nylon locking nut and flat washer. Photo 17
11
Disconnect the choke & throttle cables from the control panel on the Kohler engine.
Photo 14 & 15 Make note of which hole the throttle cable is inserted.
13
14
15
EN-22A
