Engine System Argo Service Manual
Ontario Drive & Gear Limited www.odg.com
PH. (519)- 662-2840 FAX (519)- 662-2421
Lifting the Engine From the Vehicle
This procedure requires the use of an overhead hoist. Do NOT attempt to lift out by
hand. Ensure all components attached to the engine have been detached. Lift out
slowly and carefully. If you wish to remove the muffler from the engine before
raising it out, you may do so as an optional procedure. You may find it easier to
maneuver the engine up and out with the muffler removed, but it is not necessary.
Ensure all hoist chains or belts are secure, and hooks are locked into place. Keep all
fingers and hands clear of the area from which the engine is being lifted.
14. Attach the overhead hoist to the engine. There is a hook provided on the engine
Photo 18, (located near the yellow oil fill plug on earlier spec. engines and beside
the rear cylinder head cover on later spec. engines),for connecting one side of the
hoist chain. Connect the other side to the rad bracket. Photo 19
18
19
15. Slowly and gently raise the engine through the hood area. Some manuevering is
required as the engine does not necessarily come straight up and out. Avoid damage
to any other components as well as the upper body. Photo 20 & 21
20
21
EN-23A
