Engine System Argo Service Manual
Ontario Drive & Gear Limited www.odg.com
PH. (519)- 662-2840 FAX (519)- 662-2421
EN-20
15. Locate the fuel filter at the front of the vehicle and disconnect the fuel line. Be sure
to clamp the fuel line with fuel line crimpers to prevent any fuel from leaking from
the tank into the lower body.
IMPORTANT
Never stick anything into the fuel line to plug it. This could damage the fuel line
leading to stray pieces of fuel line rubber being introduced into the fuel system when
the fuel line is reconnected.
16. Disconnect the ground cable at the engine. Photo EN-37
18. Remove all 4 mounting bolts at the lower frame. The engine is secured with 4 ny-
lon locknuts.
19. Lift the engine out of the vehicle using an overhead hoist. Photo EN-38
EN-37
EN-38
On vehicles manufactured prior to BF12097, RB17665, S12222 & SN12227:
i.
Disconnect the starter cable at the starter motor.
On vehicles manufactured from BF12097, RB17665, S12222 & SN12227:
i.
Disconnect the power cable at the starter relay. The starter relay is attached to the
front of the engine close to the regulator.
17. Disconnect the power cable for the electric start.
If the engine is being replaced, all Argo components must be removed first and reinstalled
on the new engine. These include driver clutch, muffler, exhaust manifold and any return
springs.
13. Disconnect the throttle cable at the engine.
14. Disconnect the choke at the engine.
