manualshive.com logo in svg

Argo 670-33, Руководство по обслуживанию

Поделиться
Скачать
Argo 670-33 Скачать руководство пользователя страница 18

Engine System                           Argo Service Manual

Ontario Drive & Gear Limited                                                                                             www.odg.com
PH. (519)- 662-2840   FAX (519)- 662-2421

EN-18

20. Reposition the adjustable dash support

back down to the top of the transmis-
sion and secure the carriage bolt. Photo
EN-33

21. Perform the servicing procedure, Idler

Chain Installation and  Idler Chain
Adjustment in section WA of this serv-
ice guide.

22. Reinstall  the steering assembly to the transmission securing it with 3 bolts and

lockwashers.  Photo EN-34

23. Reattach the hydraulic brake calipers.  Apply blue 242 Loctite to the threads of the

mounting bolts and torque to specifications.  See step 2 of Installing the Brake
Pads (Hydraulic), if necessary.

EN-33

EN-34

24. Reconnect the ignition system at the  ig-

niter box.

25. Reinstall the clutch guard. Apply blue

242 LOCTITE to the threads of the 2
bolts that secure it to the transmission.
Install each bolt with 2 flat washers
Torque to specifications.

26. Perform the servicing procedure, In-

stalling the Driven Clutch, In section
CS of this service guide.

27. Perform the servicing procedure, Installing the Drive Belt, In section CS of this

service guide.

28

Perform the servicing procedure, Hydraulic Brake Plunger Adjustment, in section

BR of this service guide.

30. Perform the servicing procedure, Installing the Firewall, in section VB of this

service guide.  See IMPORTANT on following page.

29. Perform the servicing procedure, Installing the Battery, in section ES of this serv-

ice guide and reconnect the wiring.

Содержание 670-33






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды