ARCIMOTO FUV 2022 Скачать руководство пользователя страница 137

Страница: 137 / 194

MAINTENANCE AND CLEANING

Maximum Inflation
Pressure

The maximum cold inflation pressure to
which a tire may be inflated.

Tires

should

inflated

the

"Recommended Inflation Pressure" (see
below), which is less than the Maximum
Inflation Pressure.

Gross Vehicle
Weight Rating
(GVWR)

The maximum weight that can be safely
managed by the FUV.

The GVWR includes the FUV itself, plus
all passengers, cargo, and any other
items that are carried on-board.

Recommended
Inflation Pressure

The tire manufacturer's inflation pressure
recommendation to ensure the optimal
capacity, durability, traction and handling
of the tire.

Wheel Maintenance

Before each ride, inspect all wheels for cracks or other
damage. Replace damaged wheels promptly.

Do not operate the vehicle if wheels are damaged or cracked.
Tire or rim failure may result, leading to a loss of control.

Battery Maintenance

For better long-term performance, avoid exposing
the FUV to ambient temperatures above 140° F
(60° C) or below -22° F (-30° C) for more than 24
hours at a time.

Park your FUV in a cool and shaded area whenever
possible.

FUV Owner's Manual (REV 0) • last revised: 3/31/2022 • part# 006290 • doc ID: P10001

page 135

Содержание FUV 2022



































































































































































































Результаты поиска

Содержание FUV 2022

Отзывы:

Похожие инструкции для FUV 2022

Бренды по названию

Популярные бренды

ARCIMOTO FUV 2022, Руководство пользователя

Результаты поиска

Содержание FUV 2022

Отзывы:

Похожие инструкции для FUV 2022

Бренды по названию

Популярные бренды