ARAG Skipper LT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 20 / 56

20
6.5.4 - User Preferences
Fig. 40
Guidance settings
• Spraying activation
Fig. 41
Allows you to determine how the spraying state signal is output to Skipper LT.
Skipper LT must know when the machinery is working in order to make all necessary spraying calculations (for
instance tractor could move forward but not spray).
•
Keyboard
option : spraying job state is indicated through keyboard using
USER
key.
•
Remote
option
: connection to a remote device supplies Skipper LT information about spraying job state, for
instance a switch for the main valve of a spraying machine.
Skipper LT shall be duly connected to it to be able to receive information about its state (par. 5.7).
WARNING:
Keyboard
option locks the
" User" key function
menu described below.
• Overlapping limit
Fig. 42
Enables you to set the allowed threshold for spraying overlapping.
When this value is exceeded, Skipper LT indicates to close the relevant valves.
Overlapping limit: 1% Overlapping limit: 99%
Fig. 43 Fig. 44
CONT'D
PROGRAMMING - MACHINES SETUP
Par.
6.3
Scrolling menu items.
Increase / decrease data Quit the function or
data changes Confirm access or
data changes. Shift the
cursor Reset / disable
data