ARAG Skipper LT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 42 / 56

42
8.2.5
F5
Area
Activate the procedure to calculate the field area, while driving on borders
1
Pre ss
F5
to star t the procedure and calculate the area (functions list is no longer displayed).
Message
Select field border
is displayed to set machine side to be used as field outer edge.
2
Pre ss
F3
(
Left
) o r
F4
(
Right
): the display will show a red line drawing the field border as far as the tractor moves along.
Fig. 121
Following are the two possible instances:
fieLd border on machine Left-hand side fieLd border on machine right-hand side
Fig. 122 Fig. 123
3
Drive along field borders or border of the area to be calculated.
To complete the procedure, view again the corresponding functions list page (Fig. 105) and pre ss
F5
.
4
Message
Boundary closure?
is displayed. Press
OK
(Fig. 124).
5
To view calculated data (
Calculate
d area and
Perimete
r), press
SHIFT
a few times until viewing
Job data
page on the display (Fig. 125).
At any moment, during this procedure, press
ESC
to quit and delete drawn field border.
Fig. 124
Fig. 125
END OF PAR. 8.2 - FUNCTIONS LIST - PAGE 2
Field outer edge
(red line) follows the
path of the outermost
section valve open.
When all section valves
are closed, field border
(red line) starts from boom
centre.
WORK FUNCTIONS - PAGE 2