ARAG Skipper LT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 23 / 56

23
6.6 Memories management
Fig. 53
Allows you to load, save and/or delete information stored on Skipper LT or on a remote memory (pendrive); this
data concern jobs done or machine configurations.
The possible operations will be explained in the paragraphs below.
Preparing the Pendrive for data exchange: refer to par. 6.6.4.
6.6.1 - Internal memory
Fig. 54
Copy files to Pendrive
Allows you to transfer saved data, about jobs, from Skipper LT internal memory to a pendrive.
To display the menu items it is necessary to connect the pendrive to Skipper LT using the suitable connector (par. 5.4).
If connection is not made, the message
Pendrive not found!
is displayed.
• Copy jobs to Pendrive
Fig. 55 Fig. 56
1 Select i
tem Copy jobs to Pendrive
(Fig. 55) and press
OK
;
2
Scroll the jobs list (Fig. 56) u sing keys
+
or
-
and select
the file to copy;
3
Confirm copy by pressing
OK
.
A confirmation message is displayed once copy is completed
(Fig. 57). Press
ESC
.
Fig. 57
error messages
Fig. 58
The pendrive already contains a file with this name.
Following are the two possible instances:
- Press
OK
to replace file.
WARNING: ALL data concerning replaced file will be lost.
- Press
ESC
to avoid replacing the file: check file content or change name before repeating save option.
Fig. 59
Possible causes:
- Space available on pendrive is over: eliminate some files from pendrive as explained under
par. 6.6.2
Pendrive
/
Delete Pendrive files
and try saving again.
- The pendrive is locked: unlock and repeat saving.
PROGRAMMING - MEMORIES MANAGEMENT
Par.
6.3
Scrolling menu items.
Increase / decrease data Quit the function or
data changes Confirm access or
data changes. Shift the
cursor Reset / disable
data