ARAG Skipper LT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 21 / 56

21
Guidance settings
(CONTINUED)
• Section switch-ON time
Fig. 45
Set this menu to indicate time elapsed between sending the control to the section valve and the actual product
spraying stop.
Skipper LT will use this information to make all calculations concerning the spraying job.
• Boundary sct. management
Fig. 46
Sets the moment when Skipper LT will signal that the section valves spraying out of the field boundaries must be
opened or closed.
•
Min. overstep
option: in Fig. 47 the close / open the section valves signal will be triggered upon any field
boundaries overstep.
•
Max. coverage
option: in Fig. 48 the close section valves signal will occur ONLY when the machine is spraying
outside the field boundaries for the whole coverage.
To use these settings you need to:
- have marked field boundaries (red track in Fig. 51), using the function "Area" (par. 8.2.5).
Min. overstep Max. coverage
fieLd
boundary
Fig. 47
fieLd
boundary
Fig. 48
PROGRAMMING - MACHINES SETUP
Par.
6.3
Scrolling menu items.
Increase / decrease data Quit the function or
data changes Confirm access or
data changes. Shift the
cursor Reset / disable
data