background image

12

TECHNICAL DATA

9.1 

DIMENSIONS

9.2 

PERFORMANCE

Measuring range ................................................... 50÷2500 l/min - 13÷660 GPM
Accuracy ................................................................ +/- 1% of the measured value, 250 to 2500 l/min
Maximum pressure ................................................ 5 bar - 72 PSI
Liquid minimum conductivity ................................. 300 uS/cm
Pressure drop at maximum flowrate ...................... 0.3 bar - 44 psi
No liquid detection ................................................. Yes
Electrode electronics cleaning ............................... Yes 
Status LEDs .......................................................... Yes (RGB)

9.3 

DISPLAY

Graphic .................................................................. 128*64 pixel
Units of measurement ........................................... Liters/min, GPM , m

3

/h

Filling mode ........................................................... Yes
Volume counter mode ........................................... Yes
Partial totalizers ..................................................... 2

9.4 

ELECTRICAL FEATURES 

Power supply voltage ............................................ 9÷16 Vdc
Maximum absorption ............................................. 300 mA
Protection against polarity inversion ...................... Yes
Protection against short-circuit on outputs ............ Yes

9.4.1 

Digital output: 

Type ....................................................................... NPN
Wave shape: .......................................................... Square (duty cycle 50%) 
Maximum current: .................................................. 100 mA 
Frequency at the maximum flowrate ...................... 1Khz

9.4.2 

Pump check output:

Type ....................................................................... PNP
Maximum current................................................... 200 mA

9.4.3 

CANBUS port: 

Protocol:................................................................. A-net
Speed .................................................................... 250 Kbit/sec
Internal ending ...................................................... Not present

9.5 

ENVIRONMENTAL FEATURES 

Operating temperature .......................................... 0°C ÷ +60°C 32°F ÷ +140°F 
Storage temperature.............................................. -40°C ÷ +140°C -4°F ÷ +185°F 

Содержание orionX

















Отзывы: