Aquatec Watermaker AC 110, Техническое руководство

Страница: 34 / 38

34
Specification
Feed pumps
Note!
To ensure sufficient pre-pressure to the high-pressure pump, the delivery head of the
feed pump should not exceed 2 m.
Low pre-pressure reduces the service life of the pre-filter.
Feed pumps with higher head are optionally available.
Feed pump Aquatec type 40
Magnetically coupled centrifugal pump, Power 140/ 200 Watt
Voltage 1
~ 220-240 Volt 50/ 60 Hz, Insulation class E, IP 44. Thermal Protected.
Output 0 m= 1.320 l/h, 6 m= 1.200 l/h, 9,5 m= 600 l/h., 12,0 m= 0 l/h.
Thread ¾” BSP male, weight 3.60 kg.
Feedpump MD 40: 1~ 230V 50 Hz or 115 V 60 Hz.
Feed pump Aquatec type B-C20/A
Close-coupled centrifugal pump with open impeller, power 370 Watt
Voltage 3 ~ 400/ 440 Volt 50/ 60 Hz, Insulation class F, IP 54. Thermal protected.
Output 9,5 m= 4.200 l/h., 12,0 m= 1.500 l/h (50 Hz).
Pump casing bronze, shaft AISI 316, impeller brass. Mechanical carbon/ ceramic/ NBR seal.
Thread 1” BSP female, weight 9.00 kg.
Permissible system pressure: 3 bar.
Feedpump B-C20/A: 3~ 400/440V/50/60 Hz.
03
06
04
02
01
05
243.5
44.5
38.5
150
60
Permissible system pressure:
max. 2 bar. (29 psi)
303
182
70 82
60
Permissible system pressure:
3.5 bar. (50 psi)