Aquatec Watermaker AC 110, Техническое руководство

Страница: 3 / 38

3
This instruction includes important safety information and instructions for commissioning,
operation and maintenance of the Aquatec Watermaker components. It is essential therefore, that the
responsible specialist refers to it before starting any work on the machinery as well as prior to
commissioning. Furthermore, this instruction must always be available on site.
To ensure total satisfaction, please read this user manual carefully. Warranty will be void if the installation does
not meet this requirement. Disregarding the warnings / instructions in the User Guide and incorrect installation
can lead to serious health damage or possibly the loss of the vessel.
The following symbols and their meaning must be observed throughout the manual. Please follow the
instructions and take appropriate measures.
EXPLANATION OF SYMBOLS
Warning!
Immediate danger that
can lead to serious injury
to persons or damage to
the machine or the loss of
the vessel.
Warning!
Warnings regarding electric
power equipment. Non-
observance of safety
instructions could lead to
danger of life or limb:
Attention!
Indicates an
instruction that
requires
special
attention.
Please note the following information.
Warning!
Damage to pumps and system parts due to dry running or insufficient water
supply are not covered by warranty.
Warning!
Aquatec Watermaker are designed for permanent installation on ships.
Operation of the system is only permitted with clean seawater.
Warning!
Never operate your Aquatec Watermaker unsupervised and leave the
operation only to trained persons.
Please note: If there are any leaks, the boat can fill up with water and sink,
thereby endangering the life of the people on board.
Warning!
The maximum working pressure of 55 bar (800 psi) must not be exceeded.
When exceeding the specified product water quantity (seawater with lower salt
content, brackish water), the working pressure must be reduced.
Warning!
Install the high-pressure pump on a stable substrate
.
Install the high-pressure
pump in a dry area which allows an exchange of air necessary for cooling the
motor-pump unit.
The pumps may not be operated if explosive or flammable Materials are present.
Please note: The motors and pumps develop high temperatures during
operation. Touching it can cause burns.
Warning!
The installation of the hoses to the components of the system must be carried
out in compliance with the bending radii without stress and vibration (risk of
breakage).
Attention!
Like any piece of mechanical equipment, the system will require inspection and
service from time to time. For easy access to enable a simple regular monitoring
and proper maintenance do not place the components in inaccessible areas.
It should be easily accessible roundly to make service and inspection work as
comfortable as possible.
Attention!
The already assembled membranes can be stored for approx. 5 months in the
sealed pressure tube, preferably cool, but preferably not above 20 ° ambient
temperature. However, we recommend installing and using the Watermaker as
soon as possible.