Aquatec Watermaker AC 110, Техническое руководство

Страница: 30 / 38

30
Clamping torques and high-pressure pump spare part-numbers typ 2
Type 2, crankcase color black
Note!
When ordering spare parts please state Pump-Head Serial No.
Warning!
To unscrew nut no. 35 heat up to about 200°C.
Secure nut no. 35 with Loctite 2701.
To tighten nut no. 35 a torque wrench must be used (20Nm).
Pump head Type 2
Note!
Grease the thread of the valve screws (No. 10) with e.g. Anti-Size (metal-free
for stainless steel) to prevent seizing.
Nut no. 35 secure with
Loctite 2701
No. 52 replaced no. 13/14
After year 2018/2019
No.13 right side
for belt drive only
10
11
11
2
45
46
Serial-number
10
9 8 7 6 5 4
44 43 41 42 40
No. 44 (3 part) High pressure seal
Tightening torque:
Head-Screws No. 2, Torque 20 Nm
Valve screws No 10, Torque 28 Nm
Observe the
tightening
sequence of the
head-screws 1-8.
Thread metric
M 8