29
Step Description
1
Switch on the seed drill.
2
Perform the hearing test.
3
If the sound of the running seeding shaft is noticeably loud or irregular, contact the maintenance
and repair service, see
Contact service
on page 5 for more information.
5.7
SETTING THE BRUSH PRESSURE
Purpose
The brush pressure on the seeding shaft is regulated using the brush adjustment lever.
Requirements
The following requirement must be fulfilled for this work step:
None
Required components, tools and materials
For this work step, you need the following components, tools and materials:
None
Overview
No.
Designation
1
Brush adjustment lever
2
Setting scale
Procedure
This is how to set the brush pressure:
Step Description
1
Pull the brush adjustment lever (1) out of the setting scale.
2
Move the brush lever to the desired position and engage it in the appropriate notch of the
setting scale.
The following orientation rules apply here:
For fine seed, increase the brush pressure up to -5.
For coarse seed, reduce the brush pressure up to +4.
5.8
FILLING THE SEED HOPPER
Purpose
The seed hopper stores the seed to be spread.
Requirements
The following requirement must be fulfilled for this work step:
The implement is disconnected from the power source, see
Disconnecting the seed drill from the power
source
on page 33 for more information.
