33
Problem
Cause
Remedy
Control Box issues error
message
Error (fan)!
, control
lamp
E02
(
Fan not connected
)
lights up red on the motor
module.
Faulty cabling.
Check the cabling.
If only one fan is running, both
connection
lines
must
be
connected to this fan.
You can find more information on other faults in the operating manuals for the respective control boxes.
If the problem could not be fixed, please contact the manufacturer. You can find information for this under
Contact Service
on page 5.
7
CLEANING, MAINTENANCE, AND REPAIRS
In this section, you will learn how to clean and maintain the seed drill, and what to do in case of damage
or failure of the implement.
7.1
DISCONNECTING THE SEED DRILL FROM THE POWER
SUPPLY
Purpose
Any opening of the hopper lid requires disconnection from the electric or hydraulic supply.
Error correction, setup and maintenance work often require that the seed drill is disconnected from the
power supply.
Requirements
The following requirements must be fulfilled for this work step:
None
Required components, tools and materials
For this work step, the following components, tools and materials are required:
None
Overview
No.
Designation
1
Power supply plug of the motor module (only for electric fan PLUS)
Procedure
This is how to disconnect the seed drill from the power supply:
