6
PS 200 M1, PS 200 M1 D, PS 200 M1 MG
PS 300 M1, PS 300 M1 D, PS 300 M1 MG
PS 500 M2, PS 500 M2 D, PS 500 M2 MG, HG 300 M1
Observed guidelines
The implements and the optional devices fulfil the requirements of the following European Directives:
2006/42/EC Machinery Directive
2014/30/EU EMC Directive
2014/35/EU Low Voltage Directive
Applied standards
The following standards were applied:
EN 14018 Agricultural and forestry machinery
– Seeders – Safety
EN 349 Safety of machinery
– Minimum gaps to avoid crushing of parts of the human body
EN 60204-1 Safety of machinery
– Electrical equipment
EN 953 Safety of machinery
– Guards
ISO 12100 Safety of machinery; General principles for design; Risk assessment and risk reduction
ISO 13857 Safety of machinery
– Safety distances
2
DESCRIPTION
This section provides an overview of the technical characteristics of the seed drill.
2.1
LAYOUT AND FUNCTIONING OF THE SEED DRILL
The seed drill PS 120 M1 - PS 500 M2
The seeder with the type designations PS 120 M1 - PS 500 M2 is a pneumatic seeder with electric seeding
shaft drive. It is used to spread seed on grassland and cropland.
Seed drill layout
No.
Designation
Function
1
Seed hopper lid
Covering the seed hopper.
Protecting the seed from moisture and foreign objects.
2
Seed hopper
Carrying the seed.
Conveying the seed to the agitator and seeding shaft.
3
Operating manual tube
Storing the operating manual
