18
Step Description
Explanation/illustration
1
Using the pliers, bend the tabs on the sides of the
dispersion plates down by 80°.
Result:
2
Distribute the dispersion plates evenly across the
entire working width of the soil tillage implement.
Maximum spacing of the dispersion plates: 75 cm
3
Push the hexagon shaft through the two hexagonal
holes in the tabs on the sides of the dispersion
plate intended for this purpose.
4
Using the supplied bolts and washers, fasten the
dispersion plates onto the hexagon shaft.
Result:
5
Fasten the hexagon shaft equipped with the
dispersion plates onto the soil tillage implement at a
distance of 40 cm from the ground.
6
Connect the hoses to the dispersion plates, see
Connecting the hoses
on page 18 for more
information.
4.4
CONNECTING THE HOSES
Purpose
The hoses convey the seed from the seed drill onto the field. Before initial operation, the hoses have to be
cut to the required length and installed on the dispersion plates and the seed drill.
Requirements
The following requirement must be fulfilled for this work step:
None
Required components, tools and materials
For this work step, the following components, tools and materials are required:
Hose roll
Cutting tool
Hexagon key or Torx screwdriver
Procedure
This is how you connect the hoses to the seed drill:
