APRILIA DORSODURO 1200 ABS - ATC Скачать руководство пользователя страница 349

Страница: 349 / 408

- the ABS system intervenes by releasing pressure from the calliper until the wheel turns again at the

same speed of the other wheel; it is not possible to brake for an instant.

- if the speed difference lasts long, the system may detect an error and deactivates the ABS system.

As a consequence, the system works as any regular braking system.

Riding with an active ABS system

•

During the vehicle start-up, after the in-

strument panel initial check, the ABS

warning light stops flashing when the

speed is under 5 km/h (3.1 mph).

If the ABS warning light remains on when the

vehicle is running, it means that a fault has

been detected and the ABS system has been

automatically deactivated.

IN CASE OF FAILURE OR WITH ABS DISCONNECTED,
THE VEHICLE OPERATES AS IF IT DID NOT HAVE THIS
SYSTEM.

ABS enable/disable

Push the MODE control briefly to the left or right to

scroll through the TRIP1 or TRIP2 trip journal and

view the ABS option.

Press the centre of the MODE control to access

the ABS function.

DORSODURO 1200 ABS - ATC

Braking system

BRAK SYS - 349

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

email: [email protected]

Содержание DORSODURO 1200 ABS - ATC

























































































































































































































































































































































































































Результаты поиска

Содержание DORSODURO 1200 ABS - ATC

Отзывы:

Похожие инструкции для DORSODURO 1200 ABS - ATC

Бренды по названию

Популярные бренды

APRILIA DORSODURO 1200 ABS - ATC, Руководство по обслуживанию станции

Результаты поиска

Содержание DORSODURO 1200 ABS - ATC

Отзывы:

Похожие инструкции для DORSODURO 1200 ABS - ATC

Бренды по названию

Популярные бренды