APRILIA DORSODURO 1200 ABS - ATC Скачать руководство пользователя страница 206

Страница: 206 / 408

•

Disconnect the throttle body and fasten

it using an elastic band.

•

Unscrew and remove the screws, slid-

ing out the front coils.

•

Lower the engine and take it out of the

chassis.

Installing the engine to the vehicle

•

Place the engine on a suitable lower stand.

•

Lift the engine.

•

Place the engine so that the rear attachments on the chassis are aligned.

•

Working on the right side, insert the

three bolts with their washers.

•

Working on the right side, place the

spacers on the three bolts between the

engine block and the chassis.

CAUTION

THE SPACERS HAVE DIFFERENT SIZES. REFIT THEM IN
THE SAME WAY THEY WERE BEFORE BEING REMOVED.

Engine from vehicle

DORSODURO 1200 ABS - ATC

ENG VE - 206

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

email: [email protected]

Содержание DORSODURO 1200 ABS - ATC

























































































































































































































































































































































































































Результаты поиска

Содержание DORSODURO 1200 ABS - ATC

Отзывы:

Похожие инструкции для DORSODURO 1200 ABS - ATC

Бренды по названию

Популярные бренды

APRILIA DORSODURO 1200 ABS - ATC, Руководство по обслуживанию станции

Результаты поиска

Содержание DORSODURO 1200 ABS - ATC

Отзывы:

Похожие инструкции для DORSODURO 1200 ABS - ATC

Бренды по названию

Популярные бренды