sensor; if the circuit is open, it means that the brown/green cable from sensor PIN 2 to
VEHICLE connector PIN 70 is short circuit to ground: restore the cable harness
Bank angle sensor
Function
It tells the vehicle position to the control unit
Operation / Operating principle
When the sensor is inverted, the circuit is closed
to ground: When the Marelli control unit detects
this ground connection, it does not enable start-up
or shuts off the engine.
Level in electrical circuit diagram:
Start-up enabling switches
Location:
•
on the vehicle: under the saddle, be-
hind the battery.
•
connector: next to the sensor (2-way
White/Grey connector).
Electrical characteristics:
•
Sensor in vertical position: open circuit
(resistance: 62 kOhm)
•
Sensor inverted: closed circuit (con-
tinuity)
Pin out:
1. Ground connection
2. Voltage 5V
CAUTION
BEFORE CARRYING OUT ANY TROUBLESHOOTING,
CAREFULLY READ THE GENERAL TROUBLESHOOTING
CONCEPTS FOR ELECTRICAL DEVICES AT THE BEGIN-
NING OF THE CHECK AND CONTROL SECTION IN THE
ELECTRICAL SYSTEM CHAPTER.
DIAGNOSIS INSTRUMENT: STATUSES
Fall sensor:
Normal / Tip over
•
Indication on Navigator always Normal, even when the sensor is inverted: disconnect the
connector and, with sensor inverted, check if there is continuity between the two PINS of
the sensor: If there is not continuity, replace the sensor; if there is continuity, check the
connector: if not OK, restore. If OK, check continuity to ground of PIN 1 (Green/Pink cable):
if there is no continuity, restore the cable harness; otherwise, with key set to ON, check if
Electrical system
DORSODURO 1200 ABS - ATC
ELE SYS - 180
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: [email protected]
Содержание DORSODURO 1200 ABS - ATC
Страница 408: ......