manualshive.com logo in svg

APRILIA CAPONORD, Руководство пользователя, Страница: 94 / 168

Поделиться
Скачать
APRILIA CAPONORD Скачать руководство пользователя страница 94

03_19

•

Slowly release the clutch lever (3) and at the same time accelerate by slightly
twisting the throttle grip (2) (

Pos. B

).

The vehicle starts moving forward.

•

For the first kilometres travelled, limit the speed in order to warm up the en-
gine.

•

Accelerate gradually by twisting the throttle grip (2) (

Pos. B

) without exceed-

ing the recommended rpm.

To engage the second gear:

RIDE IN THE CORRECT GEAR AND SPEED FOR THE CONDITIONS.

DO NOT CHANGE GEAR AT A TOO LOW RPM LEVEL.

•

Release the throttle grip (2) (

Pos. A

), operate the clutch lever (3), lift the

gearshift lever (4), release the clutch lever (3) and accelerate.

•

Repeat the last two operations and engage a higher gear.

IF THE ENGINE OIL PRESSURE ICON IS DISPLAYED AND THE GENERAL
WARNING LIGHT IS ON DURING REGULAR ENGINE OPERATION, THIS MEANS
THAT THE ENGINE OIL PRESSURE IN THE CIRCUIT IS TOO LOW.

IF THIS OCCURS, STOP THE ENGINE AND CONTACT AN APRILIA Official Deal-
er.

94

3 Use

Содержание CAPONORD









































































































































































Отзывы:

Нет отзывов