APRILIA CAPONORD Скачать руководство пользователя страница 78

Страница: 78 / 168

Steering

Check that the rotation is uniform,
smooth and there are no signs of
clearance or slackness.

Side stand / Centre stand (if fitted) Check it works properly. Check

that there is no resistance when the
side stand is pulled up and down
and that the spring tension makes
it snap back to its rest position.

Lubricate couplings and joints if
necessary.

Check the safety switch for correct
operation.

Clamping elements

Check that the clamping elements
are not loose.

Adjust or tighten them as required.

Drive chain

Check it for backlash.

Fuel tank

Check the coolant level and refill if
necessary.

Check the circuit for leaks or
obstructions.

Check that the tank cap closes
correctly.

Coolant

Fluid level inside the expansion
tank should be between the
'

FULL

' and '

LOW

' reference

marks.

Engine stop switch (ON - OFF)

Check function.

3 Use

Содержание CAPONORD









































































































































































Результаты поиска

Содержание CAPONORD

Отзывы:

APRILIA CAPONORD, Руководство пользователя, Страница: 78 / 168

Результаты поиска

Содержание CAPONORD

Отзывы: