APRILIA CAPONORD Скачать руководство пользователя страница 89

Страница: 89 / 168

EXHAUST FUMES CONTAIN CARBON MONOXIDE, AN EXTREMELY HARMFUL
SUBSTANCE IF INHALED.

NEVER START THE ENGINE IN A CLOSED OR INSUFFICIENTLY VENTILATED
SPACE.

FAILURE TO OBSERVE THIS WARNING COULD LEAD TO UNCONSCIOUSNESS
AND EVEN DEATH DUE TO SUFFOCATION.

CAUTION

WITH THE SIDE STAND LOWERED, THE ENGINE MAY ONLY BE STARTED WITH
THE GEARBOX IN NEUTRAL. IF YOU ATTEMPT TO ENGAGE A GEAR IN THIS
CONDITION THE ENGINE WILL STOP.

WITH THE SIDE STAND RETRACTED, THE ENGINE MAY BE STARTED WITH
THE GEARBOX IN NEUTRAL OR WITH GEAR ENGAGED AND THE CLUTCH
LEVER PRESSED.

03_11

•

Get onto the bike in riding position.

•

Make sure that the stand has been fully retracted.

•

Make sure the light switch (1) is set to the low beam light position.

•

Set the engine stop switch (2) to RUN.

•

Turn the key (3) and set the ignition switch to ON.

At this stage:

•

On the instrument panel, all warning lights (4) and the backlighting are on for
2 seconds.

•

The current value is instantly indicated on the instrument panel during regular
vehicle riding.

3 Use

Содержание CAPONORD









































































































































































Результаты поиска

Содержание CAPONORD

Отзывы:

APRILIA CAPONORD, Руководство пользователя, Страница: 89 / 168

Результаты поиска

Содержание CAPONORD

Отзывы: