APRILIA CAPONORD Скачать руководство пользователя страница 118

Страница: 118 / 168

BLE TO WEAR LATEX GLOVES. CONTACT AN Official APRILIA Dealer FOR
REPLACEMENT.

DO NOT DISPOSE OF THE FLUID INTO THE ENVIRONMENT.

KEEP OUT OF THE REACH OF CHILDREN

DO NOT REMOVE THE COVER OF THE EXPANSION TANK (1) WHEN THE EN-
GINE IS HOT AS THE COOLANT IS UNDER PRESSURE AND AT A HIGH TEM-
PERATURE. CONTACT WITH SKIN OR CLOTHES MAY CAUSE SERIOUS
BURNS AND/OR INJURIES.

NOTE

TAKE YOUR VEHICLE TO AN Official APRILIA Dealer TO HAVE THE COOLANT
CHANGED.

WARNING

WAIT FOR THE ENGINE TO COOL DOWN BEFORE CHECKING OR TOPPING-
UP THE COOLANT LEVEL.

04_05

CHECK AND TOPPING-UP

•

Shut off the engine and wait until it cools off.

•

Keep the vehicle upright and with the two wheels on the ground.

•

Turn the handlebar to the left, keeping the vehicle upright.

•

Make sure that the coolant level in the expansion tank is between the
"

MAX

" ("

MAX

"= maximum level) and "

MIN

" ("

MIN

"= minimum level) refer-

ence marks

118

4 Maintenance

Содержание CAPONORD









































































































































































Результаты поиска

Содержание CAPONORD

Отзывы:

APRILIA CAPONORD, Руководство пользователя, Страница: 118 / 168

Результаты поиска

Содержание CAPONORD

Отзывы: