APRILIA CAPONORD Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 168

APRILIA CAPONORD Скачать руководство пользователя страница 107

03_34

The stand has been designed to support the weight of the vehicle and a minimum
load, without the added weight of rider and passenger.

The purpose of the side stand is to prevent the vehicle from falling or overturning while
rider and passenger get on the vehicle and get ready to ride; the stand should not be
used to support the weight of rider and passenger.

While getting on and off, the vehicle may become unstable due to its weight and it
may fall or overturn.

CAUTION

THE RIDER MUST GET ON THE VEHICLE FIRST AND GET OFF LAST TO BE
ABLE TO CONTROL AND BALANCE THE VEHICLE WHILE THE PASSENGER IS
GETTING ON OR OFF THE VEHICLE.

When getting on and off the vehicle, the passenger must move carefully so as not to
cause a loss of stability for vehicle and rider.

CAUTION

THE RIDER MUST INSTRUCT THE PASSENGER ON HOW TO GET ON AND OFF
THE VEHICLE SAFELY.

THE VEHICLE IS EQUIPPED WITH PASSENGER FOOTRESTS TO FACILITATE
GETTING ON OR OFF THE VEHICLE. THE PASSENGER MUST ALWAYS USE
THE LEFT FOOTREST TO GET ON AND OFF THE VEHICLE.

NEVER ATTEMPT TO GET OFF THE VEHICLE BY JUMPING OR STRETCHING
YOUR LEG TO REACH THE GROUND. THESE ARE INCORRECT PROCEDURES
THAT COMPROMISE VEHICLE STABILITY AND BALANCE.

CAUTION

ANY BAGS OR OBJECTS STRAPPED TO THE REAR OF THE VEHICLE CAN
REPRESENT AN OBSTACLE WHILE GETTING ON AND OFF.

107

3 Use

«
...
105
106
107
108
109
...
»

Содержание CAPONORD









































































































































































Отзывы:

Нет отзывов