APRILIA CAPONORD Скачать руководство пользователя страница 145 | Manualshive

Страница: 145 / 168

APRILIA CAPONORD Скачать руководство пользователя страница 145

04_40

Chain backlash check (04_40)

To check the clearance:

•

Shut off the engine.

•

Rest the vehicle on its stand.

•

Engage neutral gear.

•

Check that the vertical oscillation at a point between the pinion and the crown
on the lower branch of the chain is approx.

25 - 30 mm (0.98 - 1.18 in).

•

Move the vehicle forward so as to check the chain vertical oscillation in other
positions too. clearance should remain constant at all wheel rotation phases.

If clearance is uniform but over

30 mm (1.18

in) or below

25 mm (0.98

in), adjustment

is necessary.

CAUTION

IF CLEARANCE IS GREATER AT SOME POSITIONS, THIS MEANS THAT SOME
CHAIN LINKS ARE FLATTENED OR JAMMED.

TO AVOID RISK OF SEIZURE, LUBRICATE THE CHAIN ON A REGULAR BASIS.

Chain backlash adjustment

CAUTION

TO ADJUST THE CHAIN BACKLASH, PLEASE CONTACT AN Official Aprilia
Dealer. IF YOU ARE ADEQUATELY TRAINED AND EXPERIENCED, REFER TO
THE INSTRUCTIONS IN THIS WORKSHOP BOOKLET AVAILABLE ALSO AT
ANY DEALER.

Checking wear of chain, front and rear sprockets

Also check the following parts and make sure that the chain, pinion and sprocket do
not have:

•

Damaged rollers.

•

Loosened pins.

145

4 Maintenance

«
...
143
144
145
146
147
...
»

Содержание CAPONORD









































































































































































Отзывы:

Нет отзывов