APRILIA CAPONORD Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 168

APRILIA CAPONORD Скачать руководство пользователя страница 88

•

Ride prudently to gradually gain familiarity with the motorcycle, testing pro-
gressively higher throttle apertures only as you gain confidence

CAUTION

THE FULL PERFORMANCE OF THE VEHICLE IS ONLY AVAILABLE AFTER THE
SERVICE AT THE END OF THE RUNNING IN PERIOD.

Follow these guidelines:

•

Do not twist the throttle grip abruptly and completely when the engine is
working at a low revs, either during or after run-in.

•

During the first 100 Km (62 miles) use the brakes gently, avoiding sudden or
prolonged braking. That is to permit the adequate adjustment of the pad fric-
tion material to the brake discs.

AFTER THE SPECIFIED MILEAGE, TAKE YOUR VEHICLE TO AN Official Aprilia
Dealer FOR THE CHECKS INDICATED IN THE "AFTER-RUN-IN" TABLE IN THE
SCHEDULED MAINTENANCE SECTION TO AVOID INJURING YOURSELF, OTH-
ERS AND /OR DAMAGING THE VEHICLE.

Starting up the engine (03_11, 03_12, 03_13, 03_14, 03_15)

This vehicle is extremely powerful and must be used carefully and driven with
caution and respect for its power and potential.

Do not carry objects in the top fairing (between the handlebar and the instrument
panel) so that the handlebar can turn freely and the instrument panel is visible
at all times.

88

3 Use

«
...
86
87
88
89
90
...
»

Содержание CAPONORD









































































































































































Отзывы:

Нет отзывов